Input Types | Options 3

Automation Options

  • Activate Automation On Alarm: With this option enabled the Control Automation will be activated whenever an input with this input type is opened (alarmed).

    This option refers to the control automation set in the input type programming (General tab). It is not necessary to activate the area alarm to perform the control function.

  • Activate Automation On Restore: With this option enabled the Control Automation will be activated whenever an input with this input type is closed (restored).

    This option refers to the control automation set in the input type programming (General tab).

  • Deactivate Automation On Alarm: With this option enabled the Control Automation will be deactivated whenever an input with this input type is opened (alarmed).

    This option refers to the control automation set in the input type programming (General tab). It is not necessary to activate the area alarm to perform the control function.

  • Deactivate Automation On Restore: With this option enabled the Control automation will be deactivated whenever an input with this input type is closed (restored).

    This option refers to the control automation set in the input type programming (General tab).

  • Toggle Automation State: With this option enabled the Control Automation will be toggled whenever an input with this input type is opened (alarmed). This means that each time the input is opened the automation will switch from off to on, or vice versa.

    This option refers to the control automation set in the input type programming (General tab). It is not necessary to activate the area alarm to perform the control function.

  • 24HR Generates Bell If Armed: When this option is enabled, inputs with this input type can activate the area's bell output on a 24hr / tamper alarm, but only when the area is armed. The Activate Bell Output option must be enabled in the Options 2 tab.

    This option is not required for trouble inputs.

  • 24HR Always Generates Bell: When this option is enabled, inputs with this input type will always activate the area's bell output on a 24hr / tamper alarm. The bell will be activated even if the area is not armed. The Activate Bell Output option must be enabled in the Options 2 tab.

    This option is not required for trouble inputs.

Control Options

  • Use Input Type Output Time: This option allows the Control Output / Output Group set in the input programming to use the Control output time set in the input type programming. When the control output is activated it will turn off after the period set in the input type.

  • Toggle Input Output State: With this option enabled the Control Output / Output Group set in the input programming will be toggled whenever an input with this input type is opened (alarmed). This means that each time the input is opened the output will switch from off to on, or vice versa.

    This option refers to the control output set in the programming for each individual input (Programming | Inputs | General). It is not necessary to activate the area alarm to perform the control function.

  • Activate Input Control Output On Alarm: With this option enabled the Control Output / Output Group set in the input programming will be activated whenever an input with this input type is opened (alarmed).

    This option refers to the control output set in the programming for each individual input (Programming | Inputs | General). It is not necessary to activate the area alarm to perform the control function.

  • Activate Input Control Output On Restore: With this option enabled the Control Output / Output Group set in the input programming will be activated whenever an input with this input type is closed (restored).

    This option refers to the control output set in the programming for each individual input (Programming | Inputs | General).

  • Deactivate Input Control Output On Alarm: With this option enabled the Control Output / Output Group set in the input programming will be deactivated whenever an input with this input type is opened (alarmed).

    This option refers to the control output set in the programming for each individual input (Programming | Inputs | General). It is not necessary to activate the area alarm to perform the control function.

  • Deactivate Input Control Output On Restore: With this option enabled the Control Output / Output Group set in the input programming will be deactivated whenever an input with this input type is closed (restored).

    This option refers to the control output set in the programming for each individual input (Programming | Inputs | General).