Doors | Alarm Options

To set the outputs used by the alarms below, see the Outputs tab.

Pre-Alarm Options

  • Enable Pre-Alarm Alarms: The door pre-alarm is activated when the door has been left open for the Door Pre-Alarm Delay Time, activating an output to warn users that the left open alarm is about to be activated. Disable this option to disable the pre-alarm function for this door.
  • Disable During Unlock Schedule: Enable this option to disable the door pre-alarm while the door has been latch unlocked by an unlock schedule.
  • Disable During Manual Commands: Enable this option to disable the door pre-alarm when the door has been latch unlocked by an operator using a manual command. The pre-alarm will still activate when the door has been unlocked (i.e. temporarily unlocked) by a manual command.
  • Disable Whilst Unlocked By Area: Enable this option to disable the door pre-alarm when the door has been latch unlocked by an area (e.g. using the Area Disarmed OR Schedule Valid Unlock Door option in the Options tab).
  • Disable Whilst Unlocked by Programmable Function: Enable this option to disable the door pre-alarm when the door has been latch unlocked by a programmable function.
  • Disable Whilst Unlocked by Fire Drop: Enable this option to disable the door pre-alarm when the door has been latch unlocked by a programmable function with the Door Control Mode 2 - Fire Control Door Unlock.
  • Alarm Operating Schedule: The door pre-alarm will be enabled when this schedule is valid and disabled when this schedule is invalid.

Left Open Options

  • Enable Left Open Alarms: The door left open alarm is activated when the door has been left open for the Door Left Open Alarm Time, activating an output and opening the Door Left Open trouble input to report the alarm to the monitoring station. Disable this option to disable all left open alarm functions for this door.

    Disabling the left open alarm will not automatically disable the pre-alarm.

  • Disable During Unlock Schedule: Enable this option to disable the left open alarm when the door has been unlocked by an unlock schedule.
  • Disable During Manual Commands: Enable this option to disable the left open alarm when the door has been latch unlocked by an operator using a manual command. The pre-alarm will still activate when the door has been unlocked (i.e. temporarily unlocked) by a manual command.
  • Disable Whilst Unlocked By Area: Enable this option to disable the left open alarm when the door has been latch unlocked by an area (e.g. using the Area Disarmed OR Schedule Valid Unlock Door option in the Options tab).
  • Disable Whilst Unlocked by Programmable Function: Enable this option to disable the left open alarm when the door has been latch unlocked by a programmable function.
  • Disable Whilst Unlocked by Fire Drop: Enable this option to disable the left open alarm when the door has been latch unlocked by a programmable function with the Door Control Mode 2 - Fire Control Door Unlock.
  • Alarm Operating Schedule: The left open alarm will be enabled when this schedule is valid and disabled when this schedule is invalid.

Forced Open Options

The door forced operation can also be delayed via commands. For more information see Application Note 304: Delaying Door Forced Commands.

  • Enable Forced Open Alarms: The door forced alarm is activated when the door is forced, activating an output and opening the Door Forced Open trouble input to report the alarm to the monitoring station. Disable this option to disable all door forced alarm functions for this door (although the door will still have the 'Forced Open' status on a floor plan or status page).

    Alternatively, see the Forced Door Sends Door Open option (Inputs tab).

  • Alarm Operating Schedule: The door forced alarm will be enabled when this schedule is valid and disabled when this schedule is invalid.