Trouble Inputs
Trouble inputs are used to monitor the status of the controller and in most cases are not physically connected to an external input. These can then be used to report a message to a monitoring station, remote computer, keypad or siren.
The following lists the trouble inputs that are configured in the controller:
|
Input Number |
Description |
|---|---|
|
CP001:02 |
12V Supply Failure |
|
CP001:04 |
Real Time Clock Not Set |
|
CP001:05 |
Service Test Report |
|
CP001:06 |
ContactID Reporting Failure |
|
CP001:07 |
Phone Line Fault |
|
CP001:08 |
Auxiliary Fuse / Supply Fault |
|
CP001:09 |
Bell Siren Tamper / Cut |
|
CP001:11 |
Bell Siren Current Overload |
|
CP001:13 |
Module Communication Fault |
|
CP001:14 |
Module Security Violation |
|
CP001:20 |
Report IP Reporting Failure |
|
CP001:24 |
Installer Logged In |
|
CP001:29 |
System Restarted |
|
CP001:30 |
PoE Connection Lost (legacy PoE model only) |
|
CP001:31 |
Output Over-Current Failure (legacy PoE model only) |